跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
Using a Phillips #0 screwdriver to remove the two screws (Length: 7.7 mm) of the Hard Drive cover and place the cover to the side. Using a Phillips #0 screwdriver, remove the one screw (Length: 7.7 mm)  from the RAM cover and place it to the side.
  • Using a Phillips #0 screwdriver to remove the two screws (Length: 7.7 mm) of the Hard Drive cover and place the cover to the side.

  • Using a Phillips #0 screwdriver, remove the one screw (Length: 7.7 mm) from the RAM cover and place it to the side.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可