跳转到主内容
英语
中文

正翻译步骤 6

步骤 6
Once you have the retainer seated in the bezel, place the bezel face down on your watch face placing the side with the split in the retainer down first. If you do not do this, the retainer may not seat properly, as shown in the first photo. If that happens, gently pry the bezel and retainer up by hand, re-seat the retainer in the bezel, and try again.
Re-Assembly (Continued)
  • Once you have the retainer seated in the bezel, place the bezel face down on your watch face placing the side with the split in the retainer down first. If you do not do this, the retainer may not seat properly, as shown in the first photo.

  • If that happens, gently pry the bezel and retainer up by hand, re-seat the retainer in the bezel, and try again.

  • Once you have successfully replaced your bezel on the watch, it should feel like new and rotate freely again.

将护圈固定在嵌框中,需要嵌框面朝下放置在手表表面上,首先放置固定器中开口的一侧。如果不这样做,护圈可能无法正确就位,如第一张照片所示。

如果发生这种情况,用手轻轻撬起嵌框和护圈,将护圈重新安装到嵌框中,然后重试。

一旦你成功地更换了手表的表圈,它会像新的一样,可以自由旋转。

在开源创作共享许可协议下,你的投稿已被许可