跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
The side of the retainer that has a ridged surface needs to face down in the watch. The retainer sits in the groove around the inside of the metal bezel as shown in the image. Take notice of the orientation of the retainer in the image. The retainer should seat in the groove on the bezel without applying force.
Re-Assembly
  • The side of the retainer that has a ridged surface needs to face down in the watch.

  • The retainer sits in the groove around the inside of the metal bezel as shown in the image. Take notice of the orientation of the retainer in the image. The retainer should seat in the groove on the bezel without applying force.

护圈表面呈脊状的一面需要朝下。

固定器位于金属嵌框内侧的凹槽中,如图所示。注意图像中护圈的方向。夹持器应在不施加力的情况下固定在嵌框的凹槽中。

在开源创作共享许可协议下,你的投稿已被许可