注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的23指南。
正翻译步骤 1
步骤 1
-
Peel back and remove the piece of electrical tape covering the headphone jack assembly cable connector.
-
Using the tip of a spudger, flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。