注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的14指南。
正翻译步骤 4
步骤 4
-
Using the tip of the spudger, flip up the retaining flap on the microphone cable ZIF connector.
-
Insert the tip of the spudger underneath the microphone ribbon cable, removing it from its ZIF connector.
-
Slide the spudger to the left, releasing the adhesive holding the microphone ribbon cable to the headphone jack assembly.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。