跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南

英语
中文

正翻译步骤 1

步骤 1
Remove the following seven screws securing the logic board to the rear aluminum panel.
  • Remove the following seven screws securing the logic board to the rear aluminum panel.

  • Six 2.1mm Phillips #00

  • One of these screws, at the top of the logic board, is tucked beneath the headphone jack assembly cable. Take care to hold the cable out of the way while removing and replacing this screw.

  • One 2.5mm Phillips #00

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可