跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南

英语
中文

正翻译步骤 3

步骤 3
Remove the two 3.0 mm Torx screws from the front.  Use a T4 Torx screwdriver to remove the screws. The two 3.0 mm Torx screws are painted blue at the end. These screws  have screw holders around them that will also need to be removed.
  • Remove the two 3.0 mm Torx screws from the front. Use a T4 Torx screwdriver to remove the screws.

  • The two 3.0 mm Torx screws are painted blue at the end. These screws have screw holders around them that will also need to be removed.

  • Unscrew the screws from the front of the watch casing and the screw holders fall out from the back of the watch casing.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可