跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 1

步骤 1
Turn off your Surface Book and detach the display. Heat and apply an iOpener or use a hair dryer or heat gun to heat the perimeter of the display, in order to soften the glue securing it. Use a suction cup or iSclack or pull up on the edge of the display, and create a slight gap between the display glass and the frame.
  • Turn off your Surface Book and detach the display.

  • Heat and apply an iOpener or use a hair dryer or heat gun to heat the perimeter of the display, in order to soften the glue securing it.

  • Use a suction cup or iSclack or pull up on the edge of the display, and create a slight gap between the display glass and the frame.

  • Insert an opening pick into the gap.

  • Use only gentle force with the pick, and keep the display very hot (slightly too hot to touch). If you use too much force and/or allow the glue to harden, the glass will crack.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可