跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 4

步骤 4
Using tweezers, remove the ribbon strip by pulling on it. This will remove the connection. Push down on the three wires with the metal spudger and the clip will disconnect from the motherboard. The clip must be pulled up and away from the motherboard. Attempting to slide it out will damage the clip.
  • Using tweezers, remove the ribbon strip by pulling on it. This will remove the connection.

  • Push down on the three wires with the metal spudger and the clip will disconnect from the motherboard.

  • The clip must be pulled up and away from the motherboard. Attempting to slide it out will damage the clip.

  • During reassembly, remove the black tape on the ribbon cable, turn the camera upside down so you can see the port, and reinsert the cable with tweezers. It's a lot easier!

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可