跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的7指南

英语
中文

正翻译步骤 1

步骤 1
Disconnect the port hatch ribbon cable from the logic board by pulling it straight up by its black pull tab. Pull the audio out ribbon cable off the adhesive securing it to the upper case. Use a spudger to pry the audio out ribbon cable connector board off the hard drive bracket.
  • Disconnect the port hatch ribbon cable from the logic board by pulling it straight up by its black pull tab.

  • Pull the audio out ribbon cable off the adhesive securing it to the upper case.

  • Use a spudger to pry the audio out ribbon cable connector board off the hard drive bracket.

通过其黑色拉片将其直接向上拉动,将端口带状电缆从逻辑板上断开。

将音频输出带状电缆从固定在上盖上的胶带上拉出。

使用撬棒将音频输出带状电缆连接器板从硬盘驱动器支架上撬出。

在开源创作共享许可协议下,你的投稿已被许可