跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 3

步骤 3
Position the camera so the bottom is facing up and the display away from the surface. Gently pry the screen portion from the camera portion with your fingers or a plastic prybar. Do not fully separate the two components! the screen is attached by two ribbon cables.
  • Position the camera so the bottom is facing up and the display away from the surface.

  • Gently pry the screen portion from the camera portion with your fingers or a plastic prybar.

  • Do not fully separate the two components! the screen is attached by two ribbon cables.

  • Lay the display flat to expose the circuit board and the display control ribbon cables.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可