跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 2

步骤 2
Now turn your attention to the camera sensor and battery housing. Identify the two connection points of the large ribbon cable. Carefully place a flathead screwdriver under the left ribbon cable connection point and pull up to disconnect. Repeat the previous step but this time carefully remove the right ribbon cable connection point.
  • Now turn your attention to the camera sensor and battery housing. Identify the two connection points of the large ribbon cable.

  • Carefully place a flathead screwdriver under the left ribbon cable connection point and pull up to disconnect.

  • Repeat the previous step but this time carefully remove the right ribbon cable connection point.

  • After both sides of the ribbon cable have been disconnected it is ready to be replaced.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可