跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南

英语
中文

正翻译步骤 1

步骤 1
If necessary, peel the EMI gasket off the camera cable connector. Disconnect the camera cable by pulling the male end straight away from its socket toward the optical drive opening.
  • If necessary, peel the EMI gasket off the camera cable connector.

  • Disconnect the camera cable by pulling the male end straight away from its socket toward the optical drive opening.

  • Do not try to lift this connector straight up off the board. Pull the connector parallel to the face of the logic board.

  • Deroute the camera data cable from the channel in the optical drive.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可