跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的21本指南

英语
中文

正翻译步骤 3

步骤 3
Disconnect the front panel sensor assembly connector from its socket on the logic board. This press connector should also be reconnected one end at a time to minimize the risk of bending.
  • Disconnect the front panel sensor assembly connector from its socket on the logic board.

  • This press connector should also be reconnected one end at a time to minimize the risk of bending.

从主板的插座上断开前面板传感器组件排线插头。

重新连接该插头的时候也应该先从一侧开始按压,将损坏的风险降到最小。

在开源创作共享许可协议下,你的投稿已被许可