跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 6

步骤 6
Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly. Slowly pull one battery adhesive tab away from the battery, toward the bottom of the iPhone. Pull steadily, maintaining constant tension on the strip until it slips out from between the battery and the rear case. For best results, pull the strip at a 60º angle or less.
  • Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly.

  • Slowly pull one battery adhesive tab away from the battery, toward the bottom of the iPhone.

  • Pull steadily, maintaining constant tension on the strip until it slips out from between the battery and the rear case. For best results, pull the strip at a 60º angle or less.

  • The strip will stretch to many times its original length. Continue pulling and re-grab the strip near the battery if necessary.

尝试在此过程中保持条平折皱;皱条会粘在一起,而不是拉出来休息。

慢慢地拉一个电池胶标签远离电池,对iPhone的底部。

稳步拉,保持恒定张力的条带,直到它滑出之间的电池和后方的情况下。最好的结果是,把带在60º角或更少。

本条将许多倍的原始长度。继续拉,再拿条在电池附近,如果必要的话。

在开源创作共享许可协议下,你的投稿已被许可