翻译步骤＃13 - iPhone 7 Power and Volume Control Cable Replacement - iFixit

取消

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南。

英语

中文

上一步下一步

正翻译步骤 13

步骤 13

Slide the blade of a halberd spudger under the power button end of the button cable to separate it from the adhesive on the rear case.

Continue to separate the adhesive by moving the blade towards the top of the phone.

Continue to separate the adhesive by moving the blade towards the top of the phone.

Slide the blade of a halberd spudger under the power button end of the button cable to separate it from the adhesive on the rear case.
Continue to separate the adhesive by moving the blade towards the top of the phone.

在开源创作共享许可协议下，你的投稿已被许可。