跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
意大利语

正翻译步骤 13

步骤 13
Slide the blade of a halberd spudger under the power button end of the button cable to separate it from the adhesive on the rear case. Continue to separate the adhesive by moving the blade towards the top of the phone. Continue to separate the adhesive by moving the blade towards the top of the phone.
  • Slide the blade of a halberd spudger under the power button end of the button cable to separate it from the adhesive on the rear case.

  • Continue to separate the adhesive by moving the blade towards the top of the phone.

Fai scorrere la lama di un spudger Halberd sotto l'estremità dal lato del pulsante del cavo a piastra per separare il cavo stesso dall'adesivo presente sul case posteriore.

Continua a separare l'adesivo spingendo la lama verso la parte superiore del telefono.

在开源创作共享许可协议下,你的投稿已被许可