跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的8本指南

英语
中文

正翻译步骤 17

步骤 17
Remove two 7 mm Phillips screws securing the DC-in board to the upper case.
  • Remove two 7 mm Phillips screws securing the DC-in board to the upper case.

  • Note: This step is not completely necessary, but it will make it easier to disconnect the cable that is connected to the DC-in board.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可