跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的22指南

英语
德语

正翻译步骤 2

步骤 2
Using your fingernail or a spudger, pry open the accessory port cover on the top of the device. Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover. Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.
  • Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.

  • Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

Öffne den Zubehörslot mit einem Fingernagel oder Spudger.

Entferne die zwei 5,4 mm Schrauben mit einem Phillips #00 Schraubendreher.

在开源创作共享许可协议下,你的投稿已被许可