Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 28

Step 28
Remove the following five screws securing the logic board to the upper case: Four 3 mm Phillips screws.
  • Remove the following five screws securing the logic board to the upper case:

  • Four 3 mm Phillips screws.

  • One 3.5 mm Phillips screw.

  • Remove the two 7 mm Phillips screws securing the DC-in board to the upper case.

  • Lift the logic board from its left edge and pull it out of the upper case.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可