跳转到主内容
英语
中文

正翻译步骤 13

步骤 13
Obvious characteristics of a damaged capacitor are leakage of a brownish fluid, corrosion, or severed leads. Non-obvious signs could be measured with a capacity gauge (for the professional handyman). Search for the pegs of the capacitor on the PCB and warm up the soldering iron. Remember orientation (left-right)! The capacitor specification should be: 470nF, min. 275 VAC, 22.5 mm pitch. Only use X2-Class qualification which can be distinguished on the part. Capacitors come in blue and yellow colors.
  • Obvious characteristics of a damaged capacitor are leakage of a brownish fluid, corrosion, or severed leads. Non-obvious signs could be measured with a capacity gauge (for the professional handyman).

  • Search for the pegs of the capacitor on the PCB and warm up the soldering iron. Remember orientation (left-right)!

  • The capacitor specification should be: 470nF, min. 275 VAC, 22.5 mm pitch. Only use X2-Class qualification which can be distinguished on the part. Capacitors come in blue and yellow colors.

  • Caution: the soldering iron will be hot. Perform this action in a well-ventilated area.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可