跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 2

步骤 2
Gently pry off the six rubber covers around the outside of the screen using a 2 mm flat head screwdriver. A flat head screwdriver is preferable over a spudger as the spudger's head is not thin enough to to slip under the rubber covers. Remove the six 4.76 mm Phillips #0 screws underneath each cover.
  • Gently pry off the six rubber covers around the outside of the screen using a 2 mm flat head screwdriver.

  • A flat head screwdriver is preferable over a spudger as the spudger's head is not thin enough to to slip under the rubber covers.

  • Remove the six 4.76 mm Phillips #0 screws underneath each cover.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可