跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的7指南

英语
西班牙语

正翻译步骤 2

步骤 2
Do not remove the shield plate yet, it is attached by a connector and an adhered cable. Use a spudger to disconnect the fingerprint sensor from the motherboard.
  • Do not remove the shield plate yet, it is attached by a connector and an adhered cable.

  • Use a spudger to disconnect the fingerprint sensor from the motherboard.

  • Peel the NFC antenna cable off of the metal plate.

No remuevas la placa de escudo aun ya que está sujeta por un conector y un cable adherido.

Usa un spudger para desconectar el sensor de huella digital de su placa madre.

Despega el cable de antena NFC de la placa de metal.

在开源创作共享许可协议下,你的投稿已被许可