跳转到主内容

修复你的物品

维修的权力

商店

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的21本指南

英语
中文

正翻译步骤 2

步骤 2
Remove the two 1.3 mm Phillips #000 screws securing the bracket over the front panel sensor assembly connector. Some phones could be Y000. Apple started using Y000 for these at some point in the middle of the product's lifecycle. Some phones could be Y000. Apple started using Y000 for these at some point in the middle of the product's lifecycle.
  • Remove the two 1.3 mm Phillips #000 screws securing the bracket over the front panel sensor assembly connector.

  • Some phones could be Y000. Apple started using Y000 for these at some point in the middle of the product's lifecycle.

拆下固定前面板感应器组排线支架的两颗 1.3mm #000 十字螺丝。

取下支架。

[* red] Remove the two 1.3 mm Phillips #000 screws securing the bracket over the front panel sensor assembly connector.
[* black] Remove [* icon_note] Some phones could be Y000. Apple started using Y000 for these at some point in the bracketmiddle of the product's lifecycle.
[* black] Remove [* icon_note] Some phones could be Y000. Apple started using Y000 for these at some point in the bracketmiddle of the product's lifecycle.

在开源创作共享许可协议下,你的投稿已被许可