跳转到主内容
英语
中文

正翻译步骤 7

步骤 7
Flip up the retaining flaps on each end of the I/O board ribbon cable ZIF connector. Carefully pull the the I/O board ribbon cable from its sockets. Remove the two 4.6 mm screws holding the hard drive in place.
  • Flip up the retaining flaps on each end of the I/O board ribbon cable ZIF connector.

  • Carefully pull the the I/O board ribbon cable from its sockets.

  • Remove the two 4.6 mm screws holding the hard drive in place.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可