Use an iSclack or a suction handle to separate the phone assembly from the rear panel.
|-||[* black] Use an iSclack or a suction handle to separate the display unit from the rear panel.|
|+||[* icon_caution] Avoid to lift only the display instead of the whole phone assembly as doing so may cause damage to the screen.|
|+||[* black] Use an iSclack or a suction handle to separate the phone assembly from the rear panel.|
|+||[* icon_note] In case you can‘t manage to lift the phone assembly out of the rear panel you can insert the pointed end of a spudger in the headphone jack opening and press the phone assembly upwards until you create a gap between assembly and rear panel. Then use the spudger to lever the phone assembly out of the panel.|
|[* icon_caution] Don't remove the rear panel completely yet. There is a cable connected to it! It is running from the finger print sensor to the display unit.|