跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 3

步骤 3
Desolder the necessary wires. (Each side will be slightly different.) Be careful when using a soldering iron. Refer to the desoldering guide for tips. For the purpose of this guide we clipped the wires connected to the board.
  • Desolder the necessary wires. (Each side will be slightly different.)

  • Be careful when using a soldering iron. Refer to the desoldering guide for tips.

  • For the purpose of this guide we clipped the wires connected to the board.

  • Remove the 4 screws (7.71mm Phillips head) using the #0 screw bit, that are holding the board in place.

  • Finally, remove the audio board.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可