跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 5

步骤 5
The battery is secured with three pieces of adhesive, a removable pull-tab in the center, and on the SIM tray side. A third piece of adhesive on the button side has no pull-tab. Pull the adhesive tabs in a slow constant movement  to free the battery. Should those adhesive tabs snap, you might want to use an iOpener to heat and soften them a little bit so you can pry out the battery with a spudger.
  • The battery is secured with three pieces of adhesive, a removable pull-tab in the center, and on the SIM tray side. A third piece of adhesive on the button side has no pull-tab.

  • Pull the adhesive tabs in a slow constant movement to free the battery.

  • Should those adhesive tabs snap, you might want to use an iOpener to heat and soften them a little bit so you can pry out the battery with a spudger.

  • There are two cables running directly underneath the battery. Take care not to damage them when prying with a spudger! You can see their position in the last picture.

  • Slowly lift the battery toward the button side and free it from the remaining hidden piece of adhesive.

  • When reassembling your phone replace old adhesive with double-sided tape or pre-cut adhesive strips.

电池由三块粘合剂固定,中间有一个可拆卸的拉条,SIM托盘侧固定。按钮侧的第三块粘合剂没有拉条。

不断移动拉动胶粘片以释放电池。

如果这些粘贴标签卡住,您可能需要使用一个iOpener来加热和软化它们,这样您就可以用挑线器撬出电池了。

电缆正下方有两根电缆。 用撬棒撬时不要伤害他们! 你可以看到他们在最后一张照片中的位置。

缓慢提起电池,将其从隐藏的粘合剂中取出。完成!

组装你的手机时可以用 double-sided tape 或者 pre-cut adhesive strips来替换原来的密封胶.

在开源创作共享许可协议下,你的投稿已被许可