跳转到主内容

修复你的物品

维修的权力

配件 & 工具

英语
中文

正翻译步骤 7

步骤 7
In this step, you will solder the battery leads to the solder pads on the logic board. Excess heat transferred to the logic board while soldering may result in electronic component damage. As a rule of thumb, hold the tip of the soldering iron against the joint just long enough to melt the solder, then quickly remove it.
  • In this step, you will solder the battery leads to the solder pads on the logic board.

  • Excess heat transferred to the logic board while soldering may result in electronic component damage. As a rule of thumb, hold the tip of the soldering iron against the joint just long enough to melt the solder, then quickly remove it.

  • Solder the connection by momentarily placing the tip of the soldering iron against the connection, melting solder into the connection, and quickly removing both the solder and the tip of the soldering iron from the connection. The solder should flow around the new battery lead, solidly connecting it to the pad on the logic board.

  • Solder the other two battery leads in the same fashion, taking care not to bridge any of the connections together.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可