翻译步骤＃6 - iPod Nano 1st Generation Battery & Logic Board Replacement - iFixit

Fix Your Stuff

Right to Repair

Parts & Tools

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南。

英语

中文

上一步下一步

正翻译步骤 6

步骤 6

Disconnecting the following two ribbon cables may be challenging. To prevent straining the cables or connectors, you can only separate the two halves of the iPod about 1/2 inch during the process.

Disconnecting the following two ribbon cables may be challenging. To prevent straining the cables or connectors, you can only separate the two halves of the iPod about 1/2 inch during the process.
Use a spudger to flip up the black plastic tab holding the orange display ribbon in place. The black tab will rotate up 90 degrees, releasing the ribbon cable.

在开源创作共享许可协议下，你的投稿已被许可。