跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 1

步骤 1
Open the back panel by using a Jimmy on the side of the panel. Be careful not to damage the OP-1 coating. Lift the back panel and remove it. The Connector Board is revealed. Disconnect the flex connector by lifting it up with a spudger.
Remove Back Panel
  • Open the back panel by using a Jimmy on the side of the panel. Be careful not to damage the OP-1 coating.

  • Lift the back panel and remove it. The Connector Board is revealed.

  • Disconnect the flex connector by lifting it up with a spudger.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可