修复你的物品

维修的权力

商店

返回指南
英语
中文
上一步

正翻译步骤 19

步骤 19
Connect both the SATA data and SATA power connectors to their respective sockets on the SSD. Peel the backing off of the double sided tape. Carefully set the SSD into the iMac optical bay as close to the lower left corner as possible.

  • Connect both the SATA data and SATA power connectors to their respective sockets on the SSD.

  • Peel the backing off of the double sided tape.

  • Carefully set the SSD into the iMac optical bay as close to the lower left corner as possible.

  • Do not repeatedly stick and un-stick the tape, as the adhesive will become weaker.

  • Once you are happy with the SSD's placement, firmly press down along its edges to ensure full adhesion.

  • When re-installing the optical drive, the SATA cable will be sandwiched between the foam padding and the optical drive.

将SATA数据和SATA电源连接器连接到SSD上的相应插槽。

剥离双面胶带的背面。

小心地将SSD置于iMac光驱托架中，尽可能靠近左下角。

不要重复粘贴和去除粘贴胶带，因为粘合胶会变弱。

一旦您对SSD的放置感到满意，请沿其边缘牢牢按下以确保完全粘附。

重新安装光驱时，SATA电缆将夹在泡沫垫片和光驱之间。

在开源创作共享许可协议下，你的投稿已被许可。