修复你的物品

维修的权力

商店

返回指南
英语
中文
上一步 下一步

正翻译步骤 17

步骤 17
Route the new SATA cable through the indentation that the primary SATA cable goes through and into the optical drive bay. Not all of the 27” iMacs (2011) have the channel in the optical drive wall to route SSD cabling. If you have one of these iMacs, you can simply route the cables under the optical drive.

  • Route the new SATA cable through the indentation that the primary SATA cable goes through and into the optical drive bay.

  • Not all of the 27” iMacs (2011) have the channel in the optical drive wall to route SSD cabling. If you have one of these iMacs, you can simply route the cables under the optical drive.

  • Set the logic board back into place, being careful not to catch, cover, or pinch any cables.

  • Be sure that the SATA cable has as much slack as possible and that it is not tangled with any other cables.

  • Make sure the cables are not stacked on top of each other; they have to lay as flat as possible

将新的SATA电缆穿过主SATA电缆穿过的凹槽并进入光驱托架。

不是所有的27“iMac（2011）在光驱墙上都有通道来路由SSD布线。 如果您有这些iMac之一，您可以简单地将光缆路由在光驱下。

将主板重新放置到位，小心不要缠住，盖住或夹住任何电缆。

确保SATA电缆尽可能松弛，并且不会与任何其他电缆缠结。

确保电缆不堆叠在一起; 他们必须尽可能平坦

在开源创作共享许可协议下，你的投稿已被许可。