注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的15本指南。
正翻译步骤 6
步骤 6
-
Insert the flat edge of a spudger into the bottom right corner of the device.
-
Twist the spudger to widen the gap between the display assembly and the rear case.
-
Slide the flat end of the spudger up the right side of the phone to break up the adhesive holding the display in place.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。