Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 13

Step 13
The solder bead should look like a small dome or hemisphere. If it is flat or jagged, simply place the soldering iron back on the solder to re-melt it and then pull the soldering iron away. It may require a little more solder if this does not work.
  • The solder bead should look like a small dome or hemisphere. If it is flat or jagged, simply place the soldering iron back on the solder to re-melt it and then pull the soldering iron away. It may require a little more solder if this does not work.

焊珠应该看起来像一个小圆顶或半球。 如果是平坦的或锯齿状的,只需将烙铁放回焊料上,再重新熔化,然后将烙铁拉走。 如果不起作用,可能需要更多的焊锡。

在开源创作共享许可协议下,你的投稿已被许可