跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 12

步骤 12
We recommend that you clean the surface-mount solder pads with a soft cloth or sponge and a small amount of rubbing alcohol.
  • We recommend that you clean the surface-mount solder pads with a soft cloth or sponge and a small amount of rubbing alcohol.

  • To melt a small bead of solder onto each solder pad:

  • Place the tip of the soldering iron against the solder pad.

  • Melt solder so that it forms a dome on top of the pad.

  • Remove both the solder and the soldering iron tip from the solder pad as soon as enough solder melts onto the pad.

我们建议您用软布或海绵蘸取少量的酒精清洁表面贴装焊盘。

将一小块焊料熔化到每个焊盘上:

将烙铁头放在焊盘上。

熔化焊料,使其在焊盘顶部形成圆顶形状。

一旦足够的焊料熔化到焊盘上,请从焊盘上移走焊料和烙铁头。

在开源创作共享许可协议下,你的投稿已被许可