Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 10

Step 10
To solder each connection:
  • To solder each connection:

  • Place the tip of the soldering iron against the solder pad.

  • Melt just enough solder onto the solder pad so that the contact leads hold firmly in place.

  • Remove both the solder and the soldering iron tip from the connection as soon as enough solder melts onto the pad.

焊接每个连接:

将烙铁头放在焊盘上。

将足够的焊料熔化到焊盘上,使接触引线牢固地固定到位。

一旦足够的焊料熔化到焊盘上,则取下焊料和烙铁头。

在开源创作共享许可协议下,你的投稿已被许可