注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。
正翻译步骤 27
步骤 27
-
Turn on your soldering iron. If your soldering iron has temperature control:
-
Set it to 350 °C (~650 °F) if you're using leaded solder
-
Set it to 400 °C (~750 °F) if you're using lead-free solder
-
Clean the tip of your soldering iron. If you're using a sponge, wet the sponge and quickly wipe the tip across it. If you're using brass wire, stab the tip into the wire a few times.
-
If you're not using solder paste, melt a small amount of solder onto the tip. You'll transfer this solder onto the joint.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。