注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。
正翻译步骤 25
步骤 25
-
Set up your tools in a well-lit area, away from anything flammable.
-
Set the circuit board on a flat, non-flammable, heat-resistant surface or secure it with helping hands or a PCB vise.
-
Place the fume extractor close to the project so that it'll catch the solder fumes.
-
Wear your safety goggles.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。