修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的17本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 26

步骤 26
To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery. The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.

  • To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.

  • The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.

  • Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.

为了防止触电的风险，您可以使用一个电池撬片来切断电池的连接。

将电池撬片滑动到电池端子和逻辑板连接的下方，然后在您工作的时候就无需理会撬片。

[* icon_note] To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.
[* icon_caution] The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.
[* black] Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.

在开源创作共享许可协议下，你的投稿已被许可。