跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 1

步骤 1
Before proceeding, remove the metal EMI finger shown by pulling it away from the adhesive on the logic board. Do not forget to reinstall this during reassembly.
  • Before proceeding, remove the metal EMI finger shown by pulling it away from the adhesive on the logic board.

  • Do not forget to reinstall this during reassembly.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可