跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 3

步骤 3
Push the tip of a spudger beneath the rubber adhesive and toward the battery to free it from the surface of the logic board.
  • Push the tip of a spudger beneath the rubber adhesive and toward the battery to free it from the surface of the logic board.

  • Start freeing the adhesive from around one of the outer leads, then free it from the two gaps between leads, and finally push the spudger along the back side of the leads to completely remove it from the logic board/battery leads.

  • The battery leads are delicate, so be careful to not tear them while removing the black adhesive.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可