翻译步骤＃5 - iPod Nano 3rd Generation Logic Board Replacement - iFixit

修复你的物品

维修的权力

商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南。

英语

中文

上一步下一步

正翻译步骤 5

步骤 5

The logic board is still connected to the front case by the display ribbon cable, located on the headphone jack side of the logic board.

Lift the logic board assembly out of the front case from the click wheel connector side (the cable you just disconnected). Rotate the logic board assembly about the display ribbon cable and lay it next to the front case.

The logic board is still connected to the front case by the display ribbon cable, located on the headphone jack side of the logic board.
Lift the logic board assembly out of the front case from the click wheel connector side (the cable you just disconnected). Rotate the logic board assembly about the display ribbon cable and lay it next to the front case.

在开源创作共享许可协议下，你的投稿已被许可。