翻译步骤＃11 - iBook G4 14" 1.42 GHz Logic Board Replacement

英语

中文

正翻译步骤 11

步骤 11

Remove the following 8 screws:
Eight 3.5 mm Phillips.
Two 3.5 mm Phillips near the sleep light connector.
One 3.5 mm Phillips with a large head in the lower left corner.
One 4.5 mm Phillips.
From top to bottom, disconnect the inverter, fan, and sleep light cables from the logic board.
When replacing the logic board, make sure that the inverter cable is not pinned under the logic board.
When replacing the logic board, make sure that the inverter cable is not pinned under the logic board.

在开源创作共享许可协议下，你的投稿已被许可。