跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 5

步骤 5
Remove the following 9 screws and 2 nuts from the heat sink:
  • Remove the following 9 screws and 2 nuts from the heat sink:

  • Four 3 mm Phillips from around the fan and the heat sink bracket. The bracket can also be removed at this point.

  • One 11.5 mm (left) and one 4.5 mm (right) Phillips from the plastic fingers of the hinge grill.

  • One 4.5 mm Phillips at the top right corner of the heat sink.

  • Two 6 mm Phillips on the lower left corner and face of the heat sink.

  • Two 4 mm screw nuts with attached springs from either side of the heat sink.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可