跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的4本指南

英语
中文

正翻译步骤 2

步骤 2
Use plastic spudger to separate backplate from the front-plate.  Place the flat end of the spudger in the seam between the front and back, near one end of the calculator.  Then slide the spudger towards the calculator's center.  The two sides will  pop free from each other as you go through it with the spudger. Use plastic spudger to separate backplate from the front-plate.  Place the flat end of the spudger in the seam between the front and back, near one end of the calculator.  Then slide the spudger towards the calculator's center.  The two sides will  pop free from each other as you go through it with the spudger. Use plastic spudger to separate backplate from the front-plate.  Place the flat end of the spudger in the seam between the front and back, near one end of the calculator.  Then slide the spudger towards the calculator's center.  The two sides will  pop free from each other as you go through it with the spudger.
  • Use plastic spudger to separate backplate from the front-plate. Place the flat end of the spudger in the seam between the front and back, near one end of the calculator. Then slide the spudger towards the calculator's center. The two sides will pop free from each other as you go through it with the spudger.

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可