跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的7本指南

英语
中文

正翻译步骤 2

步骤 2
Use a spudger to pry the modem up from the end nearest the AirPort card to separate its connector from a socket on the logic board. Be sure to pry only against the heat sink or the metal framework.
  • Use a spudger to pry the modem up from the end nearest the AirPort card to separate its connector from a socket on the logic board.

  • Be sure to pry only against the heat sink or the metal framework.

  • Use your hands to seperate the modem from the modem shield.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可