跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 7

步骤 7
Insert an opening pick under the flash connector rubber cover and pry forward to remove it. To reinstall the cover, align the cover and use your finger to push it forward into place. To reinstall the cover, align the cover and use your finger to push it forward into place.
  • Insert an opening pick under the flash connector rubber cover and pry forward to remove it.

  • To reinstall the cover, align the cover and use your finger to push it forward into place.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可