跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的4本指南

英语
中文

正翻译步骤 12

步骤 12
During reassembly, do not touch the metallic area at the base of the LCD data cable, as this can cause problems with the LCD. If you do touch it accidentally, clean it gently with an alcohol wipe before continuing.
Display Assembly Installation (Cont'd)
  • During reassembly, do not touch the metallic area at the base of the LCD data cable, as this can cause problems with the LCD. If you do touch it accidentally, clean it gently with an alcohol wipe before continuing.

  • After reassembly, clean the touchscreen surface with an alcohol wipe prior to turning the iPhone back on. The alcohol helps dissipate any lingering static electricity, which can cause problems with the display.

  • After reassembly, connect the iPhone to an AC power source before turning it on for the first time. Once the iPhone has booted up successfully, you can disconnect the AC power.

  • After reassembly, protect your new display from any scratches by installing a new screen protector.

在安装屏幕时不要碰到屏幕数字排线的金属屏蔽罩,将会导致显示问题。如果不小心触摸到的话,就用酒精轻轻擦拭一下再继续其他步骤。

安装好屏幕后,翻转机身用酒精擦拭一下屏幕。这样可以清除余留的静电,静电可能引起屏幕显示问题。

安装好屏幕后,在第一次开机前用充电器对手机充电。直到手机成功启动,就可以断开电源。

装好屏幕后,给屏幕贴张膜保护新屏幕。

在开源创作共享许可协议下,你的投稿已被许可