跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 3

步骤 3
Remove the speaker enclosure assembly from the iPhone. Before reinstalling the speaker enclosure assembly's screws, be sure the Wi-Fi grounding fingers are installed below the lip in the iPhone's metal case as seen in the second picture.
  • Remove the speaker enclosure assembly from the iPhone.

  • Before reinstalling the speaker enclosure assembly's screws, be sure the Wi-Fi grounding fingers are installed below the lip in the iPhone's metal case as seen in the second picture.

  • Before reassembly, be sure to clean all metal-to-metal contact points between the grounding fingers of the Wi-Fi antenna and the case of the iPhone with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause wireless interference issues.

从iPhone上拆下扬声器组件。

在重新安装扬声器外壳组件的螺丝前,请确保将Wi-Fi接地金手指安装在iPhone金属外壳的下方,如第二张图片所示。

在重新组装前,请确保使用脱脂剂(如windex或异丙醇)清洁Wi-Fi天线的接地触点与iPhone之间的所有金属间的接触点。手指上的油可能会导致无线干扰问题。

在开源创作共享许可协议下,你的投稿已被许可